FSX Flight Replicas PA-11 Cub Special
Flight Replicas PA-11 Cub Special, plus Wagner Twin Cub, for FSX plus Acceleration.
Note: For FSX with Acceleration only. Not tested with SP2.
This package contains seven models:
• Early production version on wheels, skis and Edo 1320 floats.
• Late production version on wheels, wheel-skis and Edo 2000 floats.
• The Wagner Twin Cub.
Early and late version differences consist mainly of some cosmetic differences plus older and newer style instruments. All feature the Continental 90hp engine.
Considered by many to be the ultimate Cub, the Cub Special was effectively an intermediate stage between the famous J-3 and the equally famous PA-18 Super Cub. Featuring greater horsepower than the J-3, the Cub Special was known for its high performance, without sacrificing the light-weight simplicity of the J-3 airframe. Principle changes from the J-3 were an enclosed cowling over the more powerful engine, with the engine thrust angle canted downwards 4 degrees; the fuel tank was increased in capacity to 17 gallons and relocated to the port wing; the wing struts were redesigned; the windscreen was also re-designed, to be more aerodynamic; the seats were re-designed, with square backs that provided more support; and the cross bracing between the instrument panel and the firewall removed the tubes from the instrument panel to between the rudder pedals which give a little more foot room in the front. The PA-11 is also flown most often from the front seat, unlike the J-3, although it can in fact be soloed from either seat.
Wagner Twin Cub
In 1952, Mr. Harold Wagner, of the Wagner Aircraft Co., at Troh's Skyport, Portland, Oregon, wanted to develop a simple aircraft that would give the performance of a twin-engined aircraft at low cost. Among his experiments was the Wagner Twin Cub, which effectively was two PA-11 Cub Special's joined together. The resulting aircraft was so unconventional that Mr. Wagner called it "The Thing". It flew well, however, for a couple of years, despite the unsynchronized engines and overlapping prop arcs, although wing loading allowed only one of the two fuselages to carry any people or payload. Not finding any commercial success, the aircraft was eventually reverted back to two separate Pa-11s.
• 6 paint schemes;
• Fully clickable and workable cockpit;
• Authentic flight dynamics;
• Animated (and removable) Pilot;
• Animated (and removable) female Passenger/Pilot;
• All aircraft come with radio, GPS and Transponder (early models are hand-held);
• Working hour meter, so total flight time viewable;
• Paint Kit, so you can customize your aircraft;
• Printable Checklist.
Please note: The Manual and Paint Kit can be found in the "C:Program FilesMicrosoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesPA-11" folder.
|Delivery method (version):